LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2022 >> RAV4 LE, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Hybrid Control System (2WD, W/ Nickel Metal Hydride Battery) - Diagnostic Codes (1 Of 6)) >> HYBRID CONTROL SYSTEM (for 2WD with NICKEL METAL HYDRIDE BATTERY) >> DTC P062F-46: Hybrid/EV Powertrain Control Module EEPROM Calibration / Parameter Memory Failure [11/2018 - 08/2020] >> Description

DTC P062F-46: Hybrid/EV Powertrain Control Module EEPROM Calibration / Parameter Memory Failure [11/2018 - 08/2020]: Description

WARNING: This page is about a different car, the 2020 Toyota RAV4 and 2019 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

The hybrid vehicle control ECU assembly monitors its internal operation and will store these DTCs when it detects an internal malfunction. If these DTCs are output, replace the hybrid vehicle control ECU assembly.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Warning Indicate
P062F-46 Hybrid/EV Powertrain Control Module EEPROM Calibration / Parameter Memory Failure Either of the following conditions is met:
  • ECU internal malfunction

    (EEPROM error)

  • The power switch is turned off when the auxiliary battery voltage is 9.5 V or less.

(1 trip detection logic)
  • Hybrid vehicle control ECU Assembly
  • Auxiliary battery
Comes on Master Warning:
Comes on