LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2022 >> RAV4 LE, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Engine Control System (A25A-FXS) (W/ Canister Pump Module) - Diagnostic Codes (06 Of 13)) >> SFI SYSTEM (w/ Canister Pump Module) >> DTC P0365-31: Camshaft Position Sensor "B" Bank 1 No Signal [10/2019 - 06/2020] >> Typical Enabling Conditions

Typical Enabling Conditions

WARNING: This page is about a different car, the 2020 Toyota RAV4 and 2019 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
All of the following conditions are met -
Engine speed 600 rpm or higher
Exhaust camshaft position sensor range check fail (P0367, P0368) Not detected
Ignition switch On
Auxiliary battery voltage 8 V or higher
Exhaust camshaft position sensor voltage 0.3 to 4.7 V
Hybrid control module judge Engine running
Lost communication with hybrid vehicle control ECU assembly (U0293) Not detected