LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2022 >> RAV4 LE, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Can Communication System (Except HV) - Circuit Tests (1 Of 4) & Diagnostic Codes >> CAN COMMUNICATION SYSTEM (for Gasoline Model) >> DTC B1003: ECU Malfunction [11/2018 - ] >> Procedure

DTC B1003: ECU Malfunction [11/2018 - ]: Procedure

  1. RECONFIRM DTC OUTPUT 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Central Gateway / Trouble Codes.

      Body Electrical > Central Gateway > Trouble Codes 

      Result

      Result Proceed to
      DTC B1003 is not output from the central gateway ECU (network gateway ECU) A
      DTC B1003 is output from the central gateway ECU (network gateway ECU) B

    Result: 

    A 

    USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [11/2018 - ] 

    Result: 

    B 

    REPLACE CENTRAL GATEWAY ECU (NETWORK GATEWAY ECU). Refer to  REMOVAL [11/2018 - 02/2019]  , or refer to  REMOVAL [02/2019 - 10/2019]  , or refer to  REMOVAL [10/2019 - 08/2020]  , or refer to  REMOVAL [08/2020 - 12/2021]  , or refer to  REMOVAL [12/2021 - 10/2022]  , or refer to  REMOVAL [10/2022 - 10/2023]  , or refer to  REMOVAL [10/2023 - ] 

scientia non olet · About LEMON Manuals