DTC P0ABF-28: Hybrid/EV Battery Current Sensor "A" Signal Bias Level Out of Range / Zero Adjustment Failure [11/2018 - 08/2020]: Wiring Diagram
WARNING: This page is about a different car, the 2020 Toyota RAV4 and 2019 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
Refer to the wiring diagram for DTC P0ABF-11.
Refer to WIRING DIAGRAM [11/2018 - 06/2020], or refer to DTC P0ABF-11: Hybrid/EV Battery Current Sensor "A" Circuit Short to Ground; DTC P0ABF-15: Hybrid/EV Battery Current Sensor "A" Circuit Short to Auxiliary Battery or Open; DTC P1CBB-12: Hybrid/EV Battery Current Sensor Power Supply Circuit Short to Auxiliary Battery; DTC P1CBB-14: Hybrid/EV Battery Current Sensor Power Supply Circuit Short to Ground or Open [06/2020 - 08/2020]