LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2022 >> Prius XLE >> Repair and Diagnosis >> External Pages >> Different car >> Section 400 (Electronically Controlled Brake System - Diagnostic Codes (P0571-U0074) & Symptom Tests (Except Hybrid)) >> ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model) >> Brake Hold Standby Indicator Light Circuit [04/2018 - 08/2021] >> Description

Brake Hold Standby Indicator Light Circuit [04/2018 - 08/2021]: Description

WARNING: This page is about a different car, the 2022 Toyota Avalon, 2021 Toyota Avalon, 2020 Toyota Avalon, and 2019 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.

The brake hold standby indicator light turns on if brake hold control is possible when the following conditions required for operation standby are met and the brake hold switch (electric parking brake switch assembly) is pressed while the engine switch is on (IG).

  1. Conditions required for operation standby:
    1. The driver door is closed.
    2. The driver seat belt is fastened.
    3. The system is normal.
scientia non olet · About LEMON Manuals