DTC C13AE: System information not received [04/2018 - 08/2020]: Procedure
WARNING: This page is about a different car, the 2022 Toyota Avalon, 2021 Toyota Avalon, 2020 Toyota Avalon, and 2019 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK DTC
- Turn the power switch off.
- Connect the Techstream to the DLC3.
- Turn the power switch on (IG).
- Turn the Techstream on.
- Check for DTC.
Chassis > Electric Parking Brake > Trouble Codes
Result
Result Proceed to DTC C13AE and a CAN DTC are output at the same time A DTC C13AE is output and the MIL is illuminated B Only DTC C13AE is output C DTCs are not output D
Result:
A
GO TO CAN COMMUNICATION SYSTEM. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [04/2018 -]
Result:
B
GO TO HYBRID CONTROL SYSTEM. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [04/2018 - 08/2020]
Result:
C
REPLACE PARKING BRAKE ECU (BRAKE ACTUATOR ASSEMBLY). Refer to REMOVAL [04/2018 - 08/2021]
Result:
D
USE SIMULATION METHOD TO CHECK. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [04/2018 -]