LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2022 >> Corolla XLE >> Repair and Diagnosis >> Electrical >> Gauges >> Meter / Gauge System (Except HEV) - Diagnostic Codes (1 Of 2) >> METER / GAUGE SYSTEM (for Gasoline Model) >> DTC B1508-19: Turn Signal/Hazard Flasher Circuit Current Above Threshold [01/2019 - 03/2019] >> Procedure

DTC B1508-19: Turn Signal/Hazard Flasher Circuit Current Above Threshold [01/2019 - 03/2019]: Procedure

  1. CHECK SYMPTOMS 
    1. Check the problem symptoms.

      Result

      Result Proceed to
      All LH side turn signal lights do not blink A
      All RH side turn signal lights do not blink B

    Result: 

    B 

    See step  15

    Result: 

    A 

    See step  2

  2. CONFIRM MODEL 
    1. Choose the model to be inspected.

      Result

      Result Proceed to
      Specifications Front Turn Signal Light
      w/ AFS LED Type A
      w/o AFS LED Type B
      Bulb Type C

    Result: 

    B 

    See step  6

    Result: 

    C 

    See step  7

    Result: 

    A 

    See step  3

  3. CHECK LH SIDE TURN SIGNAL LIGHTS (FRONT TURN SIGNAL LIGHT CIRCUIT) 
    1. Disconnect the A23 headlight assembly LH connector.
    2. Operate the turn signal switch and check that the LH side turn signal lights other than the front turn signal light blink.

      HINT: 

      If the LH side turn signal lights other than the front turn signal light blink, a component of the headlight assembly LH is malfunctioning.

      Result

      Result Proceed to
      LH side turn signal lights other than the front turn signal light blink A
      Problem symptoms do not change
      (All LH side turn signal lights do not blink)
      (w/ Side Turn Signal Light)      		 B
      Problem symptoms do not change
      (All LH side turn signal lights do not blink)
      (w/o Side Turn Signal Light)      		 C

    Result: 

    B 

    See step  8

    Result: 

    C 

    See step  10

    Result: 

    A 

    See step  4

  4. CHECK LH SIDE TURN SIGNAL LIGHTS (HEADLIGHT CORD (HEADLIGHT UNIT ASSEMBLY LH)) 
    1. Connect the headlight assembly LH connector.
    2. Disconnect the B headlight cord (headlight unit assembly LH) connector.
    3. Operate the turn signal switch and check that the LH side turn signal lights other than the front turn signal light blink.

      HINT: 

      If all LH side turn signal lights do not blink, the headlight cord (headlight unit assembly LH) is malfunctioning.

      Result

      Result Proceed to
      LH side turn signal lights other than the front turn signal light blink A
      All LH side turn signal lights do not blink B

    Result: 

    B 

    REPLACE HEADLIGHT UNIT ASSEMBLY LH. Refer to  DISASSEMBLY [01/2019 - 03/2019] 

    Result: 

    A 

    See step  5

  5. CHECK LH SIDE TURN SIGNAL LIGHTS (HEADLIGHT ECU SUB-ASSEMBLY LH) 
    1. Remove the headlight ECU sub-assembly LH.

      Refer to REMOVAL [06/2018 - 09/2022]

    2. Connect the headlight cord (headlight unit assembly LH) connector to the headlight ECU sub-assembly LH connector.
    3. Operate the turn signal switch and check that the LH side turn signal lights other than the front turn signal light blink.

      HINT: 

      If all LH side turn signal lights do not blink, the headlight ECU sub-assembly LH is malfunctioning.

      Result

      Result Proceed to
      LH side turn signal lights other than the front turn signal light blink A
      All LH side turn signal lights do not blink B

    Result: 

    A 

    REPLACE HEADLIGHT UNIT ASSEMBLY LH. Refer to  DISASSEMBLY [01/2019 - 03/2019] 

    Result: 

    B 

    REPLACE HEADLIGHT ECU SUB-ASSEMBLY LH. Refer to  REMOVAL [06/2018 - 09/2022] 

  6. CHECK LH SIDE TURN SIGNAL LIGHTS (FRONT TURN SIGNAL LIGHT CIRCUIT) 
    1. Disconnect the A83 headlight assembly LH connector.
    2. Operate the turn signal switch and check that the LH side turn signal lights other than the front turn signal light blink.

      HINT: 

      If the LH side turn signal lights other than the front turn signal light blink, the headlight unit assembly LH is malfunctioning.

      Result

      Result Proceed to
      LH side turn signal lights other than the front turn signal light blink A
      Problem symptoms do not change
      (All LH side turn signal lights do not blink)
      (w/ Side Turn Signal Light)      		 B
      Problem symptoms do not change
      (All LH side turn signal lights do not blink)
      (w/o Side Turn Signal Light)      		 C

    Result: 

    A 

    REPLACE HEADLIGHT UNIT ASSEMBLY LH. Refer to  DISASSEMBLY [01/2019 - 03/2019] 

    Result: 

    B 

    See step  8

    Result: 

    C 

    See step  10

  7. CHECK LH SIDE TURN SIGNAL LIGHTS (FRONT TURN SIGNAL LIGHT CIRCUIT) 
    1. Disconnect the A90 headlight assembly LH connector.
    2. Operate the turn signal switch and check that the LH side turn signal lights other than the front turn signal light blink.

      HINT: 

      If the LH side turn signal lights other than the front turn signal light blink, the front turn signal light socket LH is malfunctioning.

      Result

      Result Proceed to
      LH side turn signal lights other than the front turn signal light blink A
      Problem symptoms do not change
      (All LH side turn signal lights do not blink)
      (w/ Side Turn Signal Light)      		 B
      Problem symptoms do not change
      (All LH side turn signal lights do not blink)
      (w/o Side Turn Signal Light)      		 C

    Result: 

    A 

    REPLACE FRONT TURN SIGNAL LIGHT SOCKET LH. Refer to  DISASSEMBLY [01/2019 - 03/2019] 

    Result: 

    C 

    See step  10

    Result: 

    B 

    See step  8

  8. CHECK LH SIDE TURN SIGNAL LIGHTS (SIDE TURN SIGNAL LIGHT CIRCUIT) 
    1. Connect the headlight assembly LH connector.
    2. Disconnect the L9 outer rear view mirror assembly LH connector.
    3. Operate the turn signal switch and check that the LH side turn signal lights other than the side turn signal light blink.

      HINT: 

      If the LH side turn signal lights other than the side turn signal light blink, a component of the outer rear view mirror assembly LH is malfunctioning.

      Result

      Result Proceed to
      LH side turn signal lights other than the side turn signal light blink A
      Problem symptoms do not change
      (All LH side turn signal lights do not blink)      		 B

    Result: 

    B 

    See step  10

    Result: 

    A 

    See step  9

  9. CHECK LH SIDE TURN SIGNAL LIGHTS (OUTER REAR VIEW MIRROR ASSEMBLY LH) 
    1. Remove the side turn signal light assembly LH from outer rear view mirror assembly LH.

      Refer to REMOVAL [06/2018 - ]

    2. Connect the wire harness connector to the outer rear view mirror assembly LH connector.
    3. Operate the turn signal switch and check that the LH side turn signal lights other than the side turn signal light blink.

      HINT: 

      If all LH side turn signal lights do not blink, the outer rear view mirror assembly LH is malfunctioning.

      Result

      Result Proceed to
      LH side turn signal lights other than the side turn signal light blink A
      All LH side turn signal lights do not blink B

    Result: 

    A 

    REPLACE SIDE TURN SIGNAL LIGHT ASSEMBLY LH. Refer to  REMOVAL [06/2018 - ] 

    Result: 

    B 

    REPLACE OUTER REAR VIEW MIRROR ASSEMBLY LH. Refer to  REMOVAL [06/2018 - ] 

  10. CONFIRM MODEL 
    1. Choose the model to be inspected.

      Result

      Result Proceed to
      for Bulb Type Rear Turn Signal Light A
      for LED Type Rear Turn Signal Light B

    Result: 

    B 

    See step  12

    Result: 

    A 

    See step  11

  11. CHECK LH SIDE TURN SIGNAL LIGHTS (REAR TURN SIGNAL LIGHT CIRCUIT) 
    1. Connect the outer rear view mirror assembly LH connector.*1
    2. Connect the headlight assembly LH connector.*2
    3. Disconnect the O104 rear combination light assembly LH connector.
    4. Operate the turn signal switch and check that the LH side turn signal lights other than the rear turn signal light blink.

      HINT: 

      If the LH side turn signal lights other than the rear turn signal light blink, the rear combination light cord LH is malfunctioning.

      1. *1: w/ Side Turn Signal Light
      2. *2: w/o Side Turn Signal Light

      Result

      Result Proceed to
      LH side turn signal lights other than the rear turn signal light blink A
      Problem symptoms do not change
      (All LH side turn signal lights do not blink)      		 B

    Result: 

    A 

    REPLACE REAR COMBINATION LIGHT CORD LH. Refer to  REMOVAL [01/2019 - 03/2019] 

    Result: 

    B 

    See step  14

  12. CHECK LH SIDE TURN SIGNAL LIGHTS (REAR TURN SIGNAL LIGHT CIRCUIT) 
    1. Connect the outer rear view mirror assembly LH connector.*1
    2. Connect the headlight assembly LH connector.*2
    3. Disconnect the O43 rear combination light assembly LH connector.
    4. Operate the turn signal switch and check that the LH side turn signal lights other than the rear turn signal light blink.

      HINT: 

      If the LH side turn signal lights other than the rear turn signal light blink, a component of the rear combination light assembly LH is malfunctioning.

      1. *1: w/ Side Turn Signal Light
      2. *2: w/o Side Turn Signal Light

      Result

      Result Proceed to
      LH side turn signal lights other than the rear turn signal light blink A
      Problem symptoms do not change
      (All LH side turn signal lights do not blink)      		 B

    Result: 

    B 

    See step  14

    Result: 

    A 

    See step  13

  13. CHECK LH SIDE TURN SIGNAL LIGHTS (REAR COMBINATION LIGHT CORD LH) 
    1. Remove the rear combination light LED LH from rear combination light assembly LH.

      Refer to DISASSEMBLY [06/2018 - ]

    2. Connect the wire harness connector to the rear combination light assembly LH connector.
    3. Operate the turn signal switch and check that the LH side turn signal lights other than the rear turn signal light blink.

      HINT: 

      If all LH side turn signal lights do not blink, the rear combination light cord LH is malfunctioning.

      Result

      Result Proceed to
      LH side turn signal lights other than the rear turn signal light blink A
      All LH side turn signal lights do not blink B

    Result: 

    A 

    REPLACE REAR COMBINATION LIGHT LED LH. Refer to  DISASSEMBLY [06/2018 - ] 

    Result: 

    B 

    REPLACE REAR COMBINATION LIGHT CORD LH. Refer to  REMOVAL [06/2018 - 09/2022] 

  14. CHECK HARNESS AND CONNECTOR (LH SIDE EACH PARTS - COMBINATION METER ASSEMBLY) 
    1. Disconnect the A21*1, A83*2 or A90*3 headlight assembly LH connector.
    2. Disconnect the L9 outer rear view mirror assembly LH connector.*4
    3. Disconnect the I5 combination meter assembly connector.
    4. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection Condition Specified Condition
      A21-1 (TNS)*1, A83-2 (B)*2, A90-1 (B)*3, L9-5 (B)*4 or I5-1 (LL) - Body ground Always 10 kΩ or higher
      O43-4 (B)*5, O104-3 (B)*6 or I5-5 (TRNL) - Body ground Always 10 kΩ or higher
      1. *1: w/ AFS
      2. *2: for LED Type Front Turn Signal Light without AFS
      3. *3: for Bulb Type Front Turn Signal Light without AFS
      4. *4: w/ Side Turn Signal Light
      5. *5: for LED Type Rear Turn Signal Light
      6. *6: for Bulb Type Rear Turn Signal Light

      Result

      Proceed to
      OK
      NG

    Result: 

    OK 

    REPLACE COMBINATION METER ASSEMBLY. Refer to  REMOVAL [01/2019 - 03/2019] 

    Result: 

    NG 

    REPAIR OR REPLACE HARNESS OR CONNECTOR 

  15. CONFIRM MODEL 
    1. Choose the model to be inspected.

      Result

      Result Proceed to
      Specifications Front Turn Signal Light
      w/ AFS LED Type A
      w/o AFS LED Type B
      Bulb Type C

    Result: 

    B 

    See step  19

    Result: 

    C 

    See step  20

    Result: 

    A 

    See step  16

  16. CHECK RH SIDE TURN SIGNAL LIGHTS (FRONT TURN SIGNAL LIGHT CIRCUIT) 
    1. Disconnect the A20 headlight assembly RH connector.
    2. Operate the turn signal switch and check that the RH side turn signal lights other than the front turn signal light blink.

      HINT: 

      If the RH side turn signal lights other than the front turn signal light blink, a component of the headlight assembly RH is malfunctioning.

      Result

      Result Proceed to
      RH side turn signal lights other than the front turn signal light blink A
      Problem symptoms do not change
      (All RH side turn signal lights do not blink)
      (w/ Side Turn Signal Light)      		 B
      Problem symptoms do not change
      (All RH side turn signal lights do not blink)
      (w/o Side Turn Signal Light)      		 C

    Result: 

    B 

    See step  21

    Result: 

    C 

    See step  23

    Result: 

    A 

    See step  17

  17. CHECK RH SIDE TURN SIGNAL LIGHTS (HEADLIGHT CORD (HEADLIGHT UNIT ASSEMBLY RH)) 
    1. Connect the headlight assembly RH connector.
    2. Disconnect the D headlight cord (headlight unit assembly RH) connector.
    3. Operate the turn signal switch and check that the RH side turn signal lights other than the front turn signal light blink.

      HINT: 

      If all RH side turn signal lights do not blink, the headlight cord (headlight unit assembly RH) is malfunctioning.

      Result

      Result Proceed to
      RH side turn signal lights other than the front turn signal light blink A
      All RH side turn signal lights do not blink B

    Result: 

    B 

    REPLACE HEADLIGHT UNIT ASSEMBLY RH. Refer to  DISASSEMBLY [01/2019 - 03/2019] 

    Result: 

    A 

    See step  18

  18. CHECK RH SIDE TURN SIGNAL LIGHTS (HEADLIGHT ECU SUB-ASSEMBLY RH) 
    1. Remove the headlight ECU sub-assembly RH.

      Refer to REMOVAL [06/2018 - 09/2022]

    2. Connect the headlight cord (headlight unit assembly RH) connector to the headlight ECU sub-assembly RH connector.
    3. Operate the turn signal switch and check that the RH side turn signal lights other than the front turn signal light blink.

      HINT: 

      If all RH side turn signal lights do not blink, the headlight ECU sub-assembly RH is malfunctioning.

      Result

      Result Proceed to
      RH side turn signal lights other than the front turn signal light blink A
      All RH side turn signal lights do not blink B

    Result: 

    A 

    REPLACE HEADLIGHT UNIT ASSEMBLY RH. Refer to  DISASSEMBLY [01/2019 - 03/2019] 

    Result: 

    B 

    REPLACE HEADLIGHT ECU SUB-ASSEMBLY RH. Refer to  REMOVAL [06/2018 - 09/2022] 

  19. CHECK RH SIDE TURN SIGNAL LIGHTS (FRONT TURN SIGNAL LIGHT CIRCUIT) 
    1. Disconnect the A82 headlight assembly RH connector.
    2. Operate the turn signal switch and check that the RH side turn signal lights other than the front turn signal light blink.

      HINT: 

      If the RH side turn signal lights other than the front turn signal light blink, the headlight unit assembly RH is malfunctioning.

      Result

      Result Proceed to
      RH side turn signal lights other than the front turn signal light blink A
      Problem symptoms do not change
      (All RH side turn signal lights do not blink)
      (w/ Side Turn Signal Light)      		 B
      Problem symptoms do not change
      (All RH side turn signal lights do not blink)
      (w/o Side Turn Signal Light)      		 C

    Result: 

    A 

    REPLACE HEADLIGHT UNIT ASSEMBLY RH. Refer to  DISASSEMBLY [01/2019 - 03/2019] 

    Result: 

    B 

    See step  21

    Result: 

    C 

    See step  23

  20. CHECK RH SIDE TURN SIGNAL LIGHTS (FRONT TURN SIGNAL LIGHT CIRCUIT) 
    1. Disconnect the A87 headlight assembly RH connector.
    2. Operate the turn signal switch and check that the RH side turn signal lights other than the front turn signal light blink.

      HINT: 

      If the RH side turn signal lights other than the front turn signal light blink, the front turn signal light socket is RH malfunctioning.

      Result

      Result Proceed to
      RH side turn signal lights other than the front turn signal light blink A
      Problem symptoms do not change
      (All RH side turn signal lights do not blink)
      (w/ Side Turn Signal Light)      		 B
      Problem symptoms do not change
      (All RH side turn signal lights do not blink)
      (w/o Side Turn Signal Light)      		 C

    Result: 

    A 

    REPLACE FRONT TURN SIGNAL LIGHT SOCKET RH. Refer to  DISASSEMBLY [01/2019 - 03/2019] 

    Result: 

    C 

    See step  23

    Result: 

    B 

    See step  21

  21. CHECK RH SIDE TURN SIGNAL LIGHTS (SIDE TURN SIGNAL LIGHT CIRCUIT) 
    1. Connect the headlight assembly RH connector.
    2. Disconnect the K10 outer rear view mirror assembly RH connector.
    3. Operate the turn signal switch and check that the RH side turn signal lights other than the side turn signal light blink.

      HINT: 

      If the RH side turn signal lights other than the side turn signal light blink, a component of the outer rear view mirror assembly RH is malfunctioning.

      Result

      Result Proceed to
      RH side turn signal lights other than the side turn signal light blink A
      Problem symptoms do not change
      (All RH side turn signal lights do not blink)      		 B

    Result: 

    B 

    See step  23

    Result: 

    A 

    See step  22

  22. CHECK RH SIDE TURN SIGNAL LIGHTS (OUTER REAR VIEW MIRROR ASSEMBLY RH) 
    1. Remove the side turn signal light assembly RH from outer rear view mirror assembly RH.

      Refer to REMOVAL [06/2018 - ]

    2. Connect the wire harness connector to the outer rear view mirror assembly RH connector.
    3. Operate the turn signal switch and check that the RH side turn signal lights other than the side turn signal light blink.

      HINT: 

      If all RH side turn signal lights do not blink, the outer rear view mirror assembly RH is malfunctioning.

      Result

      Result Proceed to
      RH side turn signal lights other than the side turn signal light blink A
      All RH side turn signal lights do not blink B

    Result: 

    A 

    REPLACE SIDE TURN SIGNAL LIGHT ASSEMBLY RH. Refer to  REMOVAL [06/2018 - ] 

    Result: 

    B 

    REPLACE OUTER REAR VIEW MIRROR ASSEMBLY RH. Refer to  REMOVAL [06/2018 - ] 

  23. CONFIRM MODEL 
    1. Choose the model to be inspected.

      Result

      Result Proceed to
      for Bulb Type Rear Turn Signal Light A
      for LED Type Rear Turn Signal Light B

    Result: 

    B 

    See step  25

    Result: 

    A 

    See step  24

  24. CHECK RH SIDE TURN SIGNAL LIGHTS (REAR TURN SIGNAL LIGHT CIRCUIT) 
    1. Connect the outer rear view mirror assembly RH connector.*1
    2. Connect the headlight assembly RH connector.*2
    3. Disconnect the O103 rear combination light assembly RH connector.
    4. Operate the turn signal switch and check that the RH side turn signal lights other than the rear turn signal light blink.

      HINT: 

      If the RH side turn signal lights other than the rear turn signal light blink, the rear combination light cord RH is malfunctioning.

      1. *1: w/ Side Turn Signal Light
      2. *2: w/o Side Turn Signal Light

      Result

      Result Proceed to
      RH side turn signal lights other than the rear turn signal light blink A
      Problem symptoms do not change
      (All RH side turn signal lights do not blink)      		 B

    Result: 

    A 

    REPLACE REAR COMBINATION LIGHT CORD RH. Refer to  REMOVAL [01/2019 - 03/2019] 

    Result: 

    B 

    See step  27

  25. CHECK RH SIDE TURN SIGNAL LIGHTS (REAR TURN SIGNAL LIGHT CIRCUIT) 
    1. Connect the outer rear view mirror assembly RH connector.*1
    2. Connect the headlight assembly RH connector.*2
    3. Disconnect the O42 rear combination light assembly RH connector.
    4. Operate the turn signal switch and check that the RH side turn signal lights other than the rear turn signal light blink.

      HINT: 

      If the RH side turn signal lights other than the rear turn signal light blink, a component of the rear combination light assembly RH is malfunctioning.

      1. *1: w/ Side Turn Signal Light
      2. *2: w/o Side Turn Signal Light

      Result

      Result Proceed to
      RH side turn signal lights other than the rear turn signal light blink A
      Problem symptoms do not change
      (All RH side turn signal lights do not blink)      		 B

    Result: 

    B 

    See step  27

    Result: 

    A 

    See step  26

  26. CHECK RH SIDE TURN SIGNAL LIGHTS (REAR COMBINATION LIGHT CORD RH) 
    1. Remove the rear combination light LED RH from rear combination light assembly RH.

      Refer to DISASSEMBLY [06/2018 - ]

    2. Connect the wire harness connector to the rear combination light assembly RH connector.
    3. Operate the turn signal switch and check that the RH side turn signal lights other than the rear turn signal light blink.

      HINT: 

      If all RH side turn signal lights do not blink, the rear combination light cord RH is malfunctioning.

      Result

      Result Proceed to
      RH side turn signal lights other than the rear turn signal light blink A
      All RH side turn signal lights do not blink B

    Result: 

    A 

    REPLACE REAR COMBINATION LIGHT LED RH. Refer to  DISASSEMBLY [06/2018 - ] 

    Result: 

    B 

    REPLACE REAR COMBINATION LIGHT CORD RH. Refer to  REMOVAL [06/2018 - 09/2022] 

  27. CHECK HARNESS AND CONNECTOR (RH SIDE EACH PARTS - COMBINATION METER ASSEMBLY) 
    1. Disconnect the A20*1, A82*2 or A87*3 headlight assembly RH connector.
    2. Disconnect the K10 outer rear view mirror assembly RH connector.*4
    3. Disconnect the I5 combination meter assembly connector.
    4. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection Condition Specified Condition
      A20-1 (TNS)*1, A82-2 (B)*2, A87-1 (B)*3, K10-5 (B)*4 or I5-2 (LR) - Body ground Always 10 kΩ or higher
      O42-4 (B)*5, O103-3 (B)*6 or I5-6 (TRNR) - Body ground Always 10 kΩ or higher
      1. *1: w/ AFS
      2. *2: for LED Type Front Turn Signal Light without AFS
      3. *3: for Bulb Type Front Turn Signal Light without AFS
      4. *4: w/ Side Turn Signal Light
      5. *5: for LED Type Rear Turn Signal Light
      6. *6: for Bulb Type Rear Turn Signal Light

      Result

      Proceed to
      OK
      NG

    Result: 

    OK 

    REPLACE COMBINATION METER ASSEMBLY. Refer to  REMOVAL [01/2019 - 03/2019] 

    Result: 

    NG 

    REPAIR OR REPLACE HARNESS OR CONNECTOR 

scientia non olet · About LEMON Manuals