LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2022 >> Corolla Cross L, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 97 (Can Communication System (HEV) - Circuit Tests (1 Of 5) & Diagnostic Codes) >> CAN COMMUNICATION SYSTEM (for HEV Model) >> Battery ECU Communication Stop Mode [11/2022 - ] >> Procedure

Battery ECU Communication Stop Mode [11/2022 - ]: Procedure

WARNING: This page is about a different car, the 2025 Toyota Corolla Cross, 2024 Toyota Corolla Cross, and 2023 Toyota Corolla Cross. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK BATTERY ECU ASSEMBLY POWER SOURCE CIRCUIT 
    1. Check the battery ECU assembly power source circuit.

      Refer to ECU Power Source Circuit [11/2022 - ]

      Result

      Proceed to
      OK
      NG

    Result: 

    OK 

    REPLACE BATTERY ECU ASSEMBLY 

    Refer to REMOVAL [11/2022 - ]

    Result: 

    NG 

    REPAIR OR REPLACE HARNESS OR CONNECTOR (POWER SOURCE CIRCUIT)