LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2022 >> Corolla Cross L, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 76 (Electronically Controlled Brake System (Except HEV) - Diagnostic Codes (5 Of 5), Symptom Tests & Circuit Tests) >> ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model) >> ABS Warning Light does not Come ON [11/2022 - ] >> Procedure

ABS Warning Light does not Come ON [11/2022 - ]: Procedure

WARNING: This page is about a different car, the 2025 Toyota Corolla Cross, 2024 Toyota Corolla Cross, and 2023 Toyota Corolla Cross. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT COMBINATION METER ASSEMBLY 
    1. Perform the Active Test of the combination meter assembly using the GTS.

      Refer to DATA LIST / ACTIVE TEST [11/2022 - ]

      Body Electrical > Combination Meter > Active Test 

      Tester Display
      ABS Warning
    2. Check the combination meter assembly.

      OK

      The ABS warning light turns on or off in accordance with GTS operation.

      Result

      Proceed to
      OK
      NG

    Result: 

    OK 

    REPLACE BRAKE ACTUATOR ASSEMBLY. Refer to  REMOVAL [11/2022 - ] 

    Result: 

    NG 

    INSPECT METER / GAUGE SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [11/2022 - ] 

scientia non olet · About LEMON Manuals