LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2022 >> Corolla Cross L, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Engine Intake / Exhaust System (M20A-FXS) - Service Information) >> Exhaust Pipe >> Removal [11/2022 - ] >> Procedure

Removal [11/2022 - ]: Procedure

WARNING: This page is about a different car, the 2025 Toyota Corolla Cross, 2024 Toyota Corolla Cross, and 2023 Toyota Corolla Cross. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE TAIL EXHAUST PIPE ASSEMBLY 
    GTY993405Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    WARNING:

    To prevent burns, do not touch the engine, exhaust pipe or other high temperature components while the engine is hot.

    1. GTY1107393Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE FRONT FLOOR CENTER BRACE 

    See step  1

  3. REMOVE NO. 2 AIR FUEL RATIO SENSOR 

    Refer to PROCEDURE - Step 2

  4. REMOVE FRONT EXHAUST PIPE ASSEMBLY (TWC: Rear Catalyst) 
    GTY993405Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    See step  2