LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2022 >> Corolla Cross L, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 50 (Hybrid Battery Control System - Service Information) >> Hybrid Vehicle Control Ecu >> Removal [12/2024 - ] >> Procedure

Removal [12/2024 - ]: Procedure

WARNING: This page is about a different car, the 2025 Toyota Corolla Cross, 2024 Toyota Corolla Cross, and 2023 Toyota Corolla Cross. However, it is still accessible from the selected car via links, so may be relevant.
  1. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL 

    Refer to REMOVAL [11/2022 - ]

  2. REMOVE CONNECTOR HOLDER 

    Refer to REMOVAL [11/2022 - ]

  3. REMOVE HYBRID VEHICLE CONTROL ECU 
    GTY993405Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    NOTE:
    • If the ECU integration box LH or ECU integration box RH is deformed or damaged, replace it.
    • Do not bend the 2 claws more than necessary.
    1. GTY1104628Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction - -