LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2022 >> Corolla Cross L, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Emission Control System (M20A-FXS) - Service Information) >> EGR Valve >> Inspection [11/2022 - ] >> Procedure

Inspection [11/2022 - ]: Procedure

WARNING: This page is about a different car, the 2025 Toyota Corolla Cross, 2024 Toyota Corolla Cross, and 2023 Toyota Corolla Cross. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT EGR VALVE ASSEMBLY 
    1. Measure the resistance according to the value(s) in the table below.
      GTY745887Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without wire harness connected
      (EGR Valve Assembly)

      Standard Resistance

      Tester Connection Condition Specified Condition
      1 (EGA+) - 2 (EGA-) 20°C (68°F) 3.1 to 3.7 Ω
      3 (EGB-) - 4 (EGB+)

      If the result is not as specified, replace the EGR valve assembly.

scientia non olet · About LEMON Manuals