Inspection [11/2022 - ]: Procedure
WARNING: This page is about a different car, the 2025 Toyota Corolla Cross, 2024 Toyota Corolla Cross, and 2023 Toyota Corolla Cross. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT VEHICLE APPROACHING SPEAKER ASSEMBLY
- Check the resistance.
- Measure the resistance according to the value(s) in the table below.
*a Component without harness connected
(Vehicle Approaching Speaker Assembly)Standard Resistance
Tester Connection Condition Specified Condition A186-1(-) - A186-2(+) Always 3.2 to 4.8 Ω HINT:
- Make sure that there are no problems such as looseness or play with the installation of the vehicle approaching speaker assembly.
- Make sure that there are no abnormalities with the vehicle approaching speaker assembly such as the presence of foreign material or tears in the paper of the speaker cone.
If the result is not as specified, replace the vehicle approaching speaker assembly.
- Measure the resistance according to the value(s) in the table below.
- Check the resistance.