LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2022 >> Corolla Cross L, AWD >> Repair and Diagnosis >> Engine Mechanical >> Auxiliary Emission Control Systems >> Emission Control System (M20A-FKS) - Service Information >> EGR Valve >> Removal [09/2021 - 11/2022] >> Procedure

Removal [09/2021 - 11/2022]: Procedure

  1. REMOVE EGR COOLER ASSEMBLY 

    Refer to REMOVAL [09/2021 - 11/2022] 

  2. REMOVE NO. 1 EGR PIPE SUB-ASSEMBLY 
    1. GTY1029075Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Disconnect the EGR valve assembly connector.
      2. Using an 8 mm socket wrench, remove the 4 bolts and No. 1 EGR pipe sub-assembly from the intake manifold and EGR valve assembly.
  3. REMOVE EGR VALVE ADAPTER GASKET 
    1. GTY1029238Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE EGR INLET GASKET 
    1. GTY1029132Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. DISCONNECT NO. 4 WATER BY-PASS HOSE 
    1. GTY1029134Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. DISCONNECT NO. 8 WATER BY-PASS HOSE 
    1. GTY1029133Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE EGR VALVE ASSEMBLY 
    1. GTY1030331Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Using the 8 mm socket wrench, remove the 2 bolts and EGR valve assembly.
scientia non olet · About LEMON Manuals