Caution / Notice / Hint
NOTE:
- Inspect the fuses for circuits related to this system before performing the following procedure.
- After replacing the skid control ECU (brake actuator assembly), perform acceleration sensor zero point calibration and store system information memorization.
Refer to UTILITY [09/2021 - 11/2022]
HINT:
When DTC P0571-11, P0571-12 and/or P0571-13 are output together with DTC C1380-7F, inspect and repair the trouble areas indicated by DTC P0571-11, P0571-12 and/or P0571-13 first.
P0571-11: Refer to DTC P0571-11: Brake Switch "A" Circuit Short to Ground [09/2021 - 11/2022]
P0571-12: Refer to DTC P0571-12: Brake Switch "A" Circuit Short to Battery [09/2021 - 11/2022]
P0571-13: Refer to DTC P0571-13: Brake Switch "A" Circuit Open [09/2021 - 11/2022]