LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2022 >> Camry Hybrid XLE >> Labor Times >> Other Variant >> Drivelines and Axles >> Driveshafts and Universal Joints >> Propeller Shaft >> Remove & Install or Remove & Replace

Remove & Install or Remove & Replace

WARNING: This page is about the Camry LE, 4WD, which is a different variant/trim than selected.
DOES NOT include removing Center Support Bearing from Front Shaft.

Applies ToNoteStandard HoursWarranty HoursSkill Level
Gas,4WD1.4C
Combination Procedure: CENTER SUPPORT BEARING: Remove & Replace:
Gas,4WD0.7B