LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2022 >> Avalon XLE >> Repair and Diagnosis >> Hybrid/Electric Powertrain >> Battery Management Systems >> Hybrid Battery Control System (Service Information) (2 Of 2) >> Hybrid Vehicle Control Ecu >> Installation [04/2018 - ] >> Procedure

Installation [04/2018 - ]: Procedure

  1. INSTALL HYBRID VEHICLE CONTROL ECU 
    1. Install the hybrid vehicle control ECU with the bolt and nut.

      Bolt 

      Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf) 

      Nut 

      Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf) 

    2. Connect the 4 hybrid vehicle control ECU connectors.
  2. INSTALL NO. 3 INSTRUMENT PANEL TO COWL BRACE SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 5 [04/2018 - 08/2019] , or refer to PROCEDURE - Step 5 [08/2019 - 08/2021] , or refer to PROCEDURE - Step 5 [08/2021 - ]

  3. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY 

    Refer to INSTALLATION [04/2018 - 08/2020] , or refer to INSTALLATION [08/2020 - ]

scientia non olet · About LEMON Manuals