Operation not Accepted Even If Air Conditioning Switch is Operated [04/2018 -]: Description
WARNING: This page is about a different variant/trim than selected.
If the air conditioning system cannot be operated using the air conditioning control panel (radio and display receiver assembly), the following factors may be the cause.
| Symptom |
Factor |
Air conditioning system cannot be operated using air conditioning control panel (radio and display receiver assembly)
- (With the exception of the switch indicators, no inputs are reflected when other switches operated)
|
- LIN communication malfunction between air conditioning amplifier assembly and air conditioning control panel (radio and display receiver assembly)
- Short to +B or ground in air conditioning amplifier assembly circuit
- Air conditioning amplifier assembly malfunction
- Air conditioning control panel (radio and display receiver assembly) malfunction
- Harness or connector
|