Air Vent cannot be Switched [04/2018 -]: Procedure
- CHECK AIR OUTLET SERVO MOTOR
- Confirm for which seat the air outlet mode cannot be changed.
Result
Result Proceed to The air outlet mode for the driver seat cannot be changed A The air outlet mode for the front passenger seat cannot be changed B The air outlet mode for the rear seats cannot be changed C
Result:
B
See step 4
Result:
C
See step 6
Result:
A
See step 2
- Confirm for which seat the air outlet mode cannot be changed.
- CHECK NO. 3 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY
- Check that the No. 3 air conditioning radiator damper servo sub-assembly is installed correctly.
OK
The No. 3 air conditioning radiator damper servo sub-assembly is installed correctly.
Result
Proceed to OK NG
Result:
NG
INSTALL NO. 3 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY. Refer to REASSEMBLY [04/2018 - 08/2019] , or refer to REASSEMBLY [08/2019 -]
Result:
OK
See step 3
- Check that the No. 3 air conditioning radiator damper servo sub-assembly is installed correctly.
- CHECK FOR DTC
- Check for DTCs.
Body Electrical > Air Conditioner > Trouble Codes
Result
Result Proceed to B1443 is not output A B1443 is output B
Result:
A
REPLACE AIR CONDITIONING RADIATOR ASSEMBLY. Refer to REMOVAL [04/2018 - 08/2019] , or refer to REMOVAL [08/2019 - 08/2021] , or refer to REMOVAL [08/2021 -]
Result:
B
GO TO DTC B1443. Refer to DTC B1443: Air Outlet Damper Control Servo Motor Circuit [04/2018 -]
- Check for DTCs.
- CHECK NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY
- Check that the No. 1 air conditioning radiator damper servo sub-assembly is installed correctly.
OK
The No. 1 air conditioning radiator damper servo sub-assembly is installed correctly.
Result
Proceed to OK NG
Result:
NG
INSTALL NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY. Refer to REASSEMBLY [04/2018 - 08/2019] , or refer to REASSEMBLY [08/2019 -]
Result:
OK
See step 5
- Check that the No. 1 air conditioning radiator damper servo sub-assembly is installed correctly.
- CHECK FOR DTC
- Check for DTCs.
Body Electrical > Air Conditioner > Trouble Codes
Result
Result Proceed to B1448 is not output A B1448 is output B
Result:
A
REPLACE AIR CONDITIONING RADIATOR ASSEMBLY. Refer to REMOVAL [04/2018 - 08/2019] , or refer to REMOVAL [08/2019 - 08/2021] , or refer to REMOVAL [08/2021 -]
Result:
B
GO TO DTC B1448. Refer to DTC B1441: Air Mix Damper Control Servo Motor Circuit (Passenger Side); DTC B1446: Air Mix Damper Control Servo Motor Circuit (Driver Side); DTC B1448: FACE Servo Motor Circuit(Passenger Side) [04/2018 -]
- Check for DTCs.
- CHECK NO. 2 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY
- Check that the No. 2 air conditioning radiator damper servo sub-assembly is installed correctly.
OK
The No. 2 air conditioning radiator damper servo sub-assembly is installed correctly.
Result
Proceed to OK NG
Result:
NG
INSTALL NO. 2 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY. Refer to REASSEMBLY [04/2018 - 08/2019] , or refer to REASSEMBLY [08/2019 -]
Result:
OK
See step 7
- Check that the No. 2 air conditioning radiator damper servo sub-assembly is installed correctly.
- CHECK FOR DTC
- Check for DTCs.
Body Electrical > Air Conditioner > Trouble Codes
Result
Result Proceed to B1449 is not output A B1449 is output B
Result:
A
REPLACE AIR CONDITIONING RADIATOR ASSEMBLY. Refer to REMOVAL [04/2018 - 08/2019] , or refer to REMOVAL [08/2019 - 08/2021] , or refer to REMOVAL [08/2021 -]
Result:
B
GO TO DTC B1449. Refer to DTC B1449: Air Outlet Damper Control Servo Motor Circuit (Rear) [04/2018 -]
- Check for DTCs.