DTC B1500-13: Fuel Sender Circuit Open [04/2018 - ]: Description

WARNING: This page is about a different variant/trim than selected.

This DTC is stored when the combination meter assembly detects a fuel sender gauge assembly malfunction via a direct line.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area	Memory	Note
B1500-13	Fuel Sender Circuit Open	Diagnosis Condition: The power switch is on (IG) IG power source voltage is 9.5 V or more Malfunction Status: Voltage signal from fuel sender gauge assembly is 0.2 V or less 3.0 times consecutively Voltage signal from fuel sender gauge assembly is 4.7 V or more 3.0 times consecutively	Harness or connector Fuel sender gauge assembly Fuel suction tube with pump and gauge assembly Combination meter assembly	-	-

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

Memory

Note

B1500-13

Fuel Sender Circuit Open

Diagnosis Condition:

Malfunction Status:

Voltage signal from fuel sender gauge assembly is 0.2 V or less 3.0 times consecutively
Voltage signal from fuel sender gauge assembly is 4.7 V or more 3.0 times consecutively