LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2022 >> Avalon XLE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 45 (Air Conditioning System - Diagnostics - Introduction (Hybrid)) >> AIR CONDITIONING SYSTEM (for HV Model) >> Initialization [04/2018 -] >> Initialization [04/2018 -]

Initialization [04/2018 -]

WARNING: This page is about a different variant/trim than selected.
  1. SERVO MOTOR INITIALIZATION 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Press the OFF switch.
    4. Turn the Techstream on.
    5. Enter the following menus: Body Electrical / Air Conditioner / Utility / Servomotor Initialization.
    6. According to the Techstream display, perform servo motor initialization.

      Body Electrical > Air Conditioner > Utility 

      Tester Display
      Servomotor Initialization

      HINT: 

      When initialization is started, the AUTO switch indicator will illuminate and then will turn off when initialization has completed.

    7. Select Exit to complete initialization.
scientia non olet · About LEMON Manuals