LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2022 >> Avalon XLE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 42 (Theft Deterrent System - Diagnostics & Circuit Tests (Hybrid)) >> THEFT DETERRENT SYSTEM (for HV Model) >> Customize Parameters [04/2018 -] >> Customize Parameters [04/2018 -]

Customize Parameters [04/2018 -]

WARNING: This page is about a different variant/trim than selected.
  1. CUSTOMIZE THEFT DETERRENT SYSTEM 
    NOTE:
    • When the customer requests a change in a function, first make sure that the function can be customized.
    • Be sure to make a note of the current settings before customizing.
    • When troubleshooting a function, first make sure that the function is set to the default setting.

    HINT: 

    The following items can be customized.

    1. Customizing with the Techstream
      1. Connect the Techstream to the DLC3.
      2. Turn the power switch on (IG).
      3. Turn the Techstream on.
      4. Enter the following menus: Customize Setting / Wireless Door Lock.
      5. Select the setting by referring to the table below.

        Wireless Door Lock 

        Tester Display Description Default Setting ECU
        Panic Function This function makes it possible to operate the theft deterrent system by continuously pressing the panic switch on the key for 0.8 seconds ON 0:OFF, 1:ON Main body ECU (Multiplex network body ECU)
scientia non olet · About LEMON Manuals