Cruise Main Indicator Light Circuit [08/2021 -]: Procedure
WARNING: This page is about a different variant/trim than selected.
- PERFORM ACTIVE TEST USING TECHSTREAM (Combination Meter)
- Perform the Active Test according to the display on the Techstream.
Body Electrical > Combination Meter > Active Test
Tester Display Measurement Item Control Range Diagnostic Note Multi Display All (White) Multi-information display (White display) ON Confirm that the vehicle is stopped with the power switch on (IG). Body Electrical > Combination Meter > Active Test
Tester Display Multi Display All (White) Result
Result Proceed to The multi-information display in the combination meter assembly turns on according to the operation of the Active Test A The multi-information display in the combination meter assembly does not turn on according to the operation of the Active Test B
Result:
B
GO TO METER / GAUGE SYSTEM. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [04/2018 -]
Result:
A
See step 2
- Perform the Active Test according to the display on the Techstream.
- READ VALUE USING TECHSTREAM (Radar Cruise1)
- Read the Data List according to the display on the Techstream.
Powertrain > Radar Cruise1 > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note Cruise Indicator Cruise control indicator status ON or OFF ON: Cruise control indicator illuminates
OFF: Cruise control indicator turns off- Powertrain > Radar Cruise1 > Data List
Tester Display Cruise Indicator Result
Result Proceed to The cruise control indicator illuminates and turns off according to the operation of the cruise control main switch A The cruise control indicator does not illuminate but the Data List items change according to the operation of the cruise control main switch B The cruise control indicator does not illuminate and the Data List items do not change according to the operation of the cruise control main switch C
Result:
A
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE. Refer to PROBLEM SYMPTOMS TABLE [08/2021 -]
Result:
B
REPLACE COMBINATION METER ASSEMBLY. Refer to REMOVAL [08/2021 -]
Result:
C
REPLACE HYBRID VEHICLE CONTROL ECU. Refer to REMOVAL [08/2021 -]
- Read the Data List according to the display on the Techstream.