LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2022 >> Avalon XLE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 34 (Engine Control System (Service Information) [A25A-FXS]) >> Ignition Coil And Spark Plug >> Removal [04/2018 - ] >> Procedure

Removal [04/2018 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 18 [04/2018 - 08/2021] , or refer to PROCEDURE - Step 18 [08/2021 - ]

  2. REMOVE IGNITION COIL ASSEMBLY 
    1. GTY762826Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Disconnect the 4 ignition coil assembly connectors.

    2. Using an 8 mm socket wrench, remove the 4 bolts and 4 ignition coil assemblies from the cylinder head cover sub-assembly.
      NOTE:

      If an ignition coil assembly has been struck or dropped, replace it.

      HINT: 

      Arrange the removed parts in the correct order.

  3. REMOVE SPARK PLUG 

    Refer to PROCEDURE - Step 3

scientia non olet · About LEMON Manuals