Caution / Notice / Hint
WARNING: This page is about a different variant/trim than selected.
NOTE:
- Inspect the fuses for circuits related to this system before performing the following procedure.
- If the sliding roof ECU (sliding roof drive gear assembly) is removed and reinstalled or replaced, the sliding roof ECU (sliding roof drive gear assembly) must be initialized.
Refer to INITIALIZATION [04/2018 - ]
- If a sliding roof ECU (sliding roof drive gear assembly) DTC is output, first perform troubleshooting for the sliding roof ECU (sliding roof drive gear assembly) DTC.
Refer to DTC CHECK / CLEAR [04/2018 - ]