DTC C1427: Malfunction in Motor [04/2018 - ]: Description
WARNING: This page is about a different variant/trim than selected.
When the power switch is on (READY), the stop light switch assembly off and the vehicle speed is 20 km/h (12 mph) or more, the skid control ECU (brake booster with master cylinder assembly) performs a self-diagnosis of the ABS motor relay circuit during the initial check of the actuator.
| DTC No. | Detection Item | INF Code | DTC Detection Condition | Trouble Area | MIL | Note |
|---|---|---|---|---|---|---|
| C1427 | Malfunction in Motor | 1159 | The pump motor built into the brake actuator assembly is not operating correctly. |
|
Comes on |
|