Typical Malfunction Thresholds
WARNING: This page is about a different variant/trim than selected.
CASE 1
| Accumulator pressure increase when pump motor is operating | Less than 0.25 MPa (2.5 kgf/cm2 , 36 psi) |
CASE 2
| Accumulator pressure after skid control ECU (brake booster with master cylinder assembly) power on | Less than 6 MPa (61.2 kgf/cm2 , 870 psi) |
CASE 3
| Accumulator pressure | Less than 14 MPa (142.8 kgf/cm2 , 2031 psi) |