Typical Enabling Conditions
WARNING: This page is about a different variant/trim than selected.
C123B
| Monitor runs whenever the following DTCs are not stored | None |
| IG2 voltage | Higher than 9.5 V |
C123E
| Monitor runs whenever the following DTCs are not stored | None |
| Both of the following conditions are met | A and B |
| A. IG1 voltage | Higher than 9.5 V |
| B. Either of the following condition is met | - |
| Vehicle speed | Higher than 10 km/h (6 mph) |
| Communication status with hybrid control system | Valid |