LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2022 >> Avalon XLE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 103 (Electronically Controlled Brake System - Diagnostic Codes (C1202-C1300) (Hybrid)) >> ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HV Model) >> DTC C1240: Yaw Rate Sensor discrimination [04/2018 -] >> Caution / Notice / Hint

Caution / Notice / Hint

WARNING: This page is about a different variant/trim than selected.
NOTE:
  • After replacing the skid control ECU (brake booster with master cylinder assembly), perform linear solenoid valve offset learning, ABS holding solenoid valve learning, yaw rate and acceleration sensor zero point calibration and system information memorization after performing "Reset Memory".

    Refer to INITIALIZATION [04/2018 - 08/2021] , or refer to INITIALIZATION [08/2021 -]

  • After replacing or reinstalling the yaw rate and acceleration sensor (airbag ECU assembly), perform yaw rate and acceleration sensor zero point calibration after clearing previously calibrated data.

    Refer to CALIBRATION [04/2018 - 08/2021] , or refer to CALIBRATION [08/2021 -]

scientia non olet · About LEMON Manuals