Typical Malfunction Thresholds
WARNING: This page is about a different variant/trim than selected.
C13C1 AND C13CA
| One of the following conditions is met | A, B, C, D or E |
| A. Difference in monitor current (for solenoid control) and monitor current (for monitoring) | Higher than 0.281 A |
| B. Both of the following conditions are met | - |
| Current monitor value (for solenoid control) | 33 or less |
| Current | Less than 2.3 A |
| C. Both of the following conditions are met | - |
| Current monitor value (for monitoring) | 33 or less |
| Current | Less than 2.3 A |
| D. Reference voltage for current monitor circuit | 1.24 V or more, or 1.09 V or less |
| E. AC/DC converter built into CPU standard voltage | 4.4 V or less |
C14F2 AND C14FB
| One of the following conditions is met | A, B, C, D or E |
| A. Difference in monitor current (for solenoid control) and monitor current (for monitoring) | Higher than 0.294 A |
| B. Both of the following conditions are met | - |
| Current monitor value (for solenoid control) | 33 or less |
| Current | Less than 2.3 A |
| C. Both of the following conditions are met | - |
| Current monitor value (for monitoring) | 33 or less |
| Current | Less than 2.3 A |
| D. Reference voltage for current monitor circuit | 1.24 V or more, or 1.09 V or less |
| E. AC/DC converter built into CPU standard voltage | 4.4 V or less |
C13C2, C13CB, C14F3 AND C14FC (CASE 1)
| Solenoid current to output duty cycle relationship | Within the insufficient value judgment area in the following Map A |
C13C2, C13CB, C14F3 AND C14FC (CASE 2)
| Solenoid current to output duty cycle relationship | Within the insufficient value judgment area in the following Map B |
C13C2, C13CB, C14F3 AND C14FC (CASE 3)
| Solenoid high side voltage | Higher than 5.46 V |
C13C3, C13CC, C14F4 AND C14FD (CASE 1)
| Solenoid current to output duty cycle relationship | Within the excessive value judgment area in the following Map C |
C13C3, C13CC, C14F4 AND C14FD (CASE 2)
| Solenoid current to output duty cycle relationship | Within the excessive value judgment area in the following Map D |
C13C3, C13CC, C14F4 AND C14FD (CASE 3)
| Current | 0.15 A or more |
C13C3, C13CC, C14F4 AND C14FD (CASE 4)
| Current | Higher than 2.3 A |