LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2022 >> Avalon XLE >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Pre-Collision System - Diagnostic Codes (Hybrid)) >> PRE-COLLISION SYSTEM (for HV Model) >> DTC C1AA9: Front Camera Module Beam Axis Not Adjusted [04/2018 - 08/2021] >> Procedure

DTC C1AA9: Front Camera Module Beam Axis Not Adjusted [04/2018 - 08/2021]: Procedure

WARNING: This page is about a different car, the 2021 Toyota Avalon, 2020 Toyota Avalon, and 2019 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
  1. GO TO FRONT CAMERA SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [04/2018 - 08/2021] 

    HINT: 

    If DTC C1AA9 is output by the pre-collision system, perform troubleshooting for the front camera system.

    Result

    Proceed to
    NEXT

    Result: 

    NEXT 

    END 

scientia non olet · About LEMON Manuals