Inspection [04/2018 - 08/2020]: Procedure
WARNING: This page is about a different car, the 2020 Toyota Avalon and 2019 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT VEHICLE APPROACHING SPEAKER ASSEMBLY
*a Component without harness connected
(Vehicle Approaching Speaker Assembly)Measure the resistance according to the value(s) in the table below.
Standard Resistance
Tester Connection Condition Specified Condition 1 (+) - 2 (-) Always 6.4 to 9.6 Ω HINT:
Make sure that the vehicle approaching speaker assembly is securely installed and not loose. If the result is not as specified, replace the vehicle approaching speaker assembly.