DTC P106A-62: Evaporative Emission System Pressure / Intake Air Pressure Signal Compare Failure; DTC P106C-62: Evaporative Emission System Pressure/Barometric Pressure Signal Compare Failure [08/2020 - ]: Description
WARNING: This page is about a different car, the 2021 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
Those DTCs are designed to detect a deviation in the output characteristics of a pressure sensor.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Memory | Note |
|---|---|---|---|---|---|---|
| P106A-62 | Evaporative Emission System Pressure / Intake Air Pressure Signal Compare Failure | The difference between the pressure of the canister pressure sensor (Vapor Pressure Pump*) and manifold absolute pressure sensor (Intake Manifold Absolute Pressure*) is higher than 7.23 kPa (1.04 psi) (2 trip detection logic). |
|
Comes on | DTC stored | SAE Code: P106A |
| P106C-62 | Evaporative Emission System Pressure/Barometric Pressure Signal Compare Failure | The difference between the pressure of the canister pressure sensor (Vapor Pressure Pump*) and atmospheric pressure sensor (Atmospheric Pressure*) is Higher than 10 kPa (1.45 psi) (2 trip detection logic). |
|
Comes on | DTC stored | SAE Code: P106C |
*: Data List name