LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2022 >> Avalon XLE >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Engine Lubrication System (Service Information) [A25A-FKS]) >> Oil Pump >> Installation [08/2020 - ] >> Procedure

Installation [08/2020 - ]: Procedure

WARNING: This page is about a different car, the 2021 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL ENGINE BALANCER ASSEMBLY 

    Refer to PROCEDURE - Step 6

  2. INSTALL STIFFENING CRANKCASE ASSEMBLY 

    Refer to PROCEDURE - Step 7

  3. INSTALL OIL PUMP ASSEMBLY 
    1. Install the oil pump assembly to the stiffening crankcase assembly with the 3 bolts.

      Torque: 24 N*m (245 kgf*cm, 18 ft.*lbf) 

  4. INSTALL OIL PUMP BRACKET 

    Refer to PROCEDURE - Step 9

  5. INSTALL ENGINE OIL LEVEL SENSOR 

    See step  1

  6. INSTALL OIL STRAINER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 11

  7. INSTALL NO. 2 OIL PAN SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 12

  8. INSTALL TIMING CHAIN COVER ASSEMBLY 

    Refer to INSTALLATION [08/2020 - ]

scientia non olet · About LEMON Manuals