Removal [08/2020 - ]: Procedure
WARNING: This page is about a different car, the 2021 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
- DRAIN ENGINE COOLANT
Refer to PROCEDURE - Step 1
- REMOVE ENGINE COOLANT TEMPERATURE SENSOR
- Disconnect the engine coolant temperature sensor connector.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Remove the clip and engine coolant temperature sensor from the water outlet.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
NOTE:
If the engine coolant temperature sensor has been struck or dropped, replace it.