LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2022 >> Avalon XLE >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Pre-Collision System - Diagnostics - Introduction (Hybrid)) >> PRE-COLLISION SYSTEM (for HV Model) >> DTC Check / Clear [04/2018 - 08/2021] >> DTC Check / Clear [04/2018 - 08/2021]

DTC Check / Clear [04/2018 - 08/2021]

WARNING: This page is about a different car, the 2021 Toyota Avalon, 2020 Toyota Avalon, and 2019 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Pre-Collision 2 / Trouble Codes.
    5. Check for DTCs.

      Refer to DIAGNOSTIC TROUBLE CODE CHART [04/2018 - 08/2020] , or refer to DIAGNOSTIC TROUBLE CODE CHART [08/2020 - 08/2021] 

      Body Electrical > Pre-Collision 2 > Trouble Codes 

  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Pre-Collision 2 / Clear DTCs.
    5. Clear the DTCs.

      Body Electrical > Pre-Collision 2 > Clear DTCs 

scientia non olet · About LEMON Manuals