Disc Rotor: Remove & Replace

Includes: Repack Wheel Bearings (where applicable) and replace Pads (if necessary). DOES NOT include refinishing.

Applies To	Note	Standard Hours	Warranty Hours	Skill Level
Gas/Electric, Front,Both	Includes: Disable Brake Control.	1.2		B
Gas/Electric, Front,One Side	Includes: Disable Brake Control.	0.8		B
Gas/Electric, Rear,Both	Includes: Disable Brake Control.	1.2		B
Gas/Electric, Rear,One Side	Includes: Disable Brake Control.	0.8		B
Combination Procedure: DISC ROTOR: Burnish Brake Rotors While Driving Vehicle:
		0.5		B
Combination Procedure: DISC ROTOR: Correct:
Lateral Runout,Each	Correct Rotor lateral runout by indexing.	0.2		B
Combination Procedure: DISC ROTOR (REMOVED): Refinish: DOES NOT include grind hot spots.
Each Additional		0.3		B
One		0.5		B
Combination Procedure: ELECTRONIC PARKING BRAKE SYSTEM: Disable & Enable:
Brake Pad Replacement Mode	Includes: Disable and enable electronic brake system with use of scan tool or interactive vehicle controls.	0.2		B
Combination Procedure: HUB & ROTOR DISC: Clean & Inspect:
Corrosion,Each	Clean any rust or corrosion from mating surface of Hub/Axle Flange and Brake Rotor.	0.2		B