LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2022 >> 4Runner TRD Pro >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Transfer Case (VF4BM) - Diagnostic Codes & Circuit Tests) >> Transfer System >> DTC U0100: Lost Communication with ECM / PCM "A"; DTC U0122: Lost Communication With Vehicle Dynamics Control Module [08/2019 - ] >> Procedure

DTC U0100: Lost Communication with ECM / PCM "A"; DTC U0122: Lost Communication With Vehicle Dynamics Control Module [08/2019 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. RECONFIRM DTC 
    1. Clear the DTCs.

      Refer to DTC CHECK / CLEAR [08/2019 - ]

    2. Check if the same DTCs are output.

      Refer to DTC CHECK / CLEAR [08/2019 - ]

      RESULT

      Result Proceed to
      DTCs are output A
      DTCs are not output B

    Result: 

    CHECK CAN COMMUNICATION SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [08/2019 - ] 

    Result: 

    USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [08/2019 - ]