LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2022 >> 4Runner TRD Pro >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Transfer Case (VF4BM) - Service Information) >> Transfer Assembly >> Installation [08/2015 - ] >> Procedure

Installation [08/2015 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. INSTALL TRANSFER ASSEMBLY 
    1. Install the transfer assembly with the 8 bolts.

      Torque: 24 N.m (245 kgf/cm, 18 ft.lbf) 

      NOTE:

      Take care not to damage the adaptor rear oil seal with the transfer input gear spline.

  2. INSTALL AUTOMATIC TRANSMISSION WITH TRANSFER 
    1. Install the automatic transmission with transfer (Refer to INSTALLATION [08/2015 - 08/2019] , or refer to INSTALLATION [08/2019 - ] ).
  3. ADD TRANSFER OIL 

    See step  2

  4. CHECK FOR TRANSFER OIL LEAK 
scientia non olet · About LEMON Manuals