Precaution [08/2015 - 08/2019]
WARNING: This page is about a different car, the 2019 Toyota 4Runner, 2018 Toyota 4Runner, 2017 Toyota 4Runner, and 2016 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.
- IGNITION SWITCH EXPRESSION
HINT:
The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this service information.
Expression Ignition Switch (Position) Engine Switch (Condition) Ignition Switch off LOCK Off (Lock) Ignition Switch ACC ACC On (ACC) Ignition Switch ON ON On (IG) Engine Start START On (Start) - HANDLING PRECAUTION FOR CRUISE CONTROL SYSTEM
- Turn the cruise control switch off when not using the cruise control system.
- Be careful as the vehicle speed increases when driving downhill with the cruise control system on.
- The RESUME/ACCEL operation changes according to the cruise control system status. When the cruise control system is operating, ACCEL operates. When the cruise control system is not operating, RESUME operates.
- When the cruise control system is operating and the cruise main indicator light blinks, turn the cruise control switch off to reset the cruise control system. After the reset, if the cruise control switch cannot be turned on, or the cruise control system is canceled immediately after turning the cruise control switch on, the system may have a malfunction.
- Do not use the cruise control system where the road conditions are as follows:
- General roads
- Heavy traffic
- Steep downhill
- Roads with sharp turns
- Icy or snowy roads
- Slippery roads
- Do not use the cruise control system while towing.