LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2022 >> 4Runner TRD Pro >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Front Bumper (W/ Intuitive Parking Assist System) - Service Information) >> FRONT BUMPER (w/ Intuitive Parking Assist System) >> Removal [08/2019 - 08/2021] >> Caution / Notice / Hint

Caution / Notice / Hint

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 Toyota 4Runner, 2020 Toyota 4Runner, 2019 Toyota 4Runner, 2018 Toyota 4Runner, and 2017 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are replaced during millimeter wave radar sensor assembly removal/installation are shown below.

NECESSARY PROCEDURES AFTER PARTS REMOVED/INSTALLED/REPLACED

Replaced Part or Performed Procedure Necessary Procedure Effect/Inoperative Function when Necessary Procedure not Performed Link
Millimeter wave radar sensor assembly Adjust millimeter wave radar sensor assembly
  • Dynamic radar cruise control system
  • Pre-collision system
  • Forward recognition camera system
  • Lane departure alert system
 Refer to ADJUSTMENT [08/2019 - ]
scientia non olet · About LEMON Manuals