Installation [08/2015 - 08/2019]: Procedure
WARNING: This page is about a different car, the 2019 Toyota 4Runner, 2018 Toyota 4Runner, 2017 Toyota 4Runner, and 2016 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL NO. 1 TRANSFER INDICATOR SWITCH (4WD POSITION)
- Install a new gasket and the No. 1 transfer indicator switch.
Torque: 37 N.m (377 kgf/cm, 27 ft.lbf)
- Install a new gasket and the No. 1 transfer indicator switch.
- INSTALL NO. 1 TRANSFER INDICATOR SWITCH (L4 POSITION)
- Install a new gasket and the No. 1 transfer indicator switch.
Torque: 37 N.m (377 kgf/cm, 27 ft.lbf)
- Install a new gasket and the No. 1 transfer indicator switch.
- INSTALL AUTOMATIC TRANSMISSION WITH TRANSFER
(Refer to INSTALLATION [08/2015 - 08/2019] )