LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2022 >> 4Runner TRD Pro >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Transfer Case (VF2BM) - Service Information) >> Transfer Indicator Switch >> Inspection [08/2015 - 08/2019] >> Procedure

Inspection [08/2015 - 08/2019]: Procedure

WARNING: This page is about a different car, the 2019 Toyota 4Runner, 2018 Toyota 4Runner, 2017 Toyota 4Runner, and 2016 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT TRANSFER INDICATOR SWITCH (4WD POSITION) 
    GTY363762Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection Switch Condition Specified Condition
      1 - 2 Pushed Below 1 Ω
      1 - 2 Not pushed 100 kΩ or higher

      If the resistance is not as specified, replace the switch.

  2. INSPECT TRANSFER INDICATOR SWITCH (L4 POSITION) 
    GTY363761Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection Switch Condition Specified Condition
      1 - 2 Pushed Below 1 Ω
      1 - 2 Not pushed 100 kΩ or higher

      If the resistance is not as specified, replace the switch.

scientia non olet · About LEMON Manuals