LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2022 >> 4Runner TRD Pro >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Transfer Case (VF2BM) - Service Information) >> Transfer Assembly >> Removal [08/2015 - 08/2019] >> Procedure

Removal [08/2015 - 08/2019]: Procedure

WARNING: This page is about a different car, the 2019 Toyota 4Runner, 2018 Toyota 4Runner, 2017 Toyota 4Runner, and 2016 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.
  1. DRAIN TRANSFER OIL 
  2. REMOVE AUTOMATIC TRANSMISSION WITH TRANSFER 

    (Refer to REMOVAL [08/2015 - 08/2019] )

  3. REMOVE TRANSFER ASSEMBLY 
    GTY369185Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Remove the 8 bolts.
    2. Pull the transfer assembly straight up and remove it from the automatic transmission.
      NOTE:

      Take care not to damage the adaptor rear oil seal with the transfer input gear spline.