LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2022 >> 4Runner TRD Pro >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Transfer Case (VF2BM) - Service Information) >> Transfer Assembly >> Installation [08/2015 - 08/2019] >> Procedure

Installation [08/2015 - 08/2019]: Procedure

WARNING: This page is about a different car, the 2019 Toyota 4Runner, 2018 Toyota 4Runner, 2017 Toyota 4Runner, and 2016 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL TRANSFER ASSEMBLY 
    1. Install the transfer assembly with the 8 bolts.

      Torque: 24 N.m (245 kgf/cm, 18 ft.lbf) 

      NOTE:

      Take care not to damage the adaptor rear oil seal with the transfer input gear spline.

  2. INSTALL AUTOMATIC TRANSMISSION WITH TRANSFER 

    (Refer to INSTALLATION [08/2015 - 08/2019] )

  3. ADD TRANSFER OIL 

    See step  2

  4. CHECK FOR TRANSFER OIL LEAK 
scientia non olet · About LEMON Manuals