Caution / Notice / Hint
NOTE:
- When replacing the skid control ECU (brake actuator assembly), perform zero point calibration and store system information (Refer to CALIBRATION [08/2015 - 08/2019] ).
- Inspect the fuses for circuits related to this system before performing the following inspection procedure.
HINT:
When DTC C1241 is output together with DTC C0278 and/or C0279, inspect and repair the trouble areas indicated by DTC C1241 first (Refer to DTC C1241: Low Power Supply Voltage Malfunction [08/2015 - 08/2019] ).