LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2022 >> 4Runner TRD Pro >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior Panels / Trim - Service Information >> Front Bumper >> Reassembly [08/2015 - 08/2019] >> Procedure

Reassembly [08/2015 - 08/2019]: Procedure

  1. INSTALL FOG LIGHT COVER LH 
    1. Attach the 5 claws to install the fog light cover LH.
    2. Install the outside moulding retainer.
  2. INSTALL FOG LIGHT COVER RH 

    HINT: 

    Use the same procedure as for the LH side.

  3. INSTALL FOG LIGHT ASSEMBLY LH 

    Refer to PROCEDURE - Step 1

  4. INSTALL FOG LIGHT ASSEMBLY RH 

    HINT: 

    Use the same procedure as for the LH side.

  5. INSTALL FRONT BUMPER REINFORCEMENT STOPPER RH (for RH Side) 
    1. Attach the guide and 2 claws to install the front bumper reinforcement stopper RH.
  6. INSTALL LOWER NO. 1 RADIATOR GRILLE 
    1. Attach the 13 claws to install the lower No. 1 radiator grille.
    2. Install the clip.
  7. INSTALL LOWER FRONT VALANCE PANEL (w/ Garnish) 
    1. Install the lower front valance panel with the 13 outside moulding retainers.
  8. INSTALL FRONT BUMPER EXTENSION MOUNTING BRACKET (w/ License Plate Bracket) 
    1. Install the front bumper extension mounting bracket with the 2 screws.
  9. INSTALL RADIATOR GRILLE 

    See step  2

scientia non olet · About LEMON Manuals