LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2022 >> 4Runner TRD Pro >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge System - Diagnostics - Introduction (2 Of 2) >> Meter / Gauge System >> Customize Parameters [08/2019 - ] >> Customize Parameters [08/2019 - ]

Customize Parameters [08/2019 - ]

  1. METER/GAUGE SYSTEM 
    1. Combination Meter
      NOTE:
      • Record the current settings before customizing.
      • When the customer requests a change in a function, first make sure that the function can be customized.

      HINT: 

      The following items can be customized using the Techstream.

      WARNING

      Tester Display Default Content Setting
      Driver Side Seatbelt Warning Buzzer* ON Function to turn on or off the seat belt warning buzzer ON or OFF
      Front Passenger Side Seatbelt Warning Buzzer* ON Function to turn on or off the seat belt warning buzzer ON or OFF
      Flasher Sound Volume Adjustment Medium Function to change the flasher sound volume $10:Large,$00:Medium,$01:Small
      Flasher Sound Tone Setting Tone 1 Function to change the flasher sound tone $00:Tone 1,$01:Tone 2,$10:Tone 3
      1. *: This setting is only valid for the buzzer which sounds at 20 km/h (12 mph) or more.
      DISPLAY

      Tester Display Default Content Setting
      ODO Display Time After IG OFF Setting 30s Function to change the ODO display time after the ignition switch is turned off $00:30s,$01:60s,$02:600s,$03:OFF
scientia non olet · About LEMON Manuals