LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Venza XLE >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine Lubrication System - Service Information >> Oil Pump >> Removal [07/2020 - 10/2022] >> Procedure

Removal [07/2020 - 10/2022]: Procedure

  1. REMOVE TIMING CHAIN COVER ASSEMBLY 

    Refer to REMOVAL [07/2020 - 10/2022]

  2. REMOVE NO. 2 OIL PAN SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 57

  3. REMOVE OIL STRAINER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 58

  4. REMOVE ENGINE OIL LEVEL SENSOR 

    See step  4

  5. REMOVE OIL PUMP BRACKET 

    Refer to PROCEDURE - Step 60

  6. REMOVE ENGINE BALANCER ASSEMBLY 

    Refer to PROCEDURE - Step 62

  7. REMOVE OIL PUMP ASSEMBLY 
    1. Remove the 3 bolts and oil pump assembly from the stiffening crankcase assembly.
      GTY754233Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. REMOVE STIFFENING CRANKCASE ASSEMBLY 

    Refer to PROCEDURE - Step 64

scientia non olet · About LEMON Manuals