Installation [10/2022 - ]: Procedure

INSTALL NO. 2 VOLTAGE INVERTER ASSEMBLY
1. Install the 2 nuts.
  Torque: 3.5 N.m (36 kgf/cm, 31 in.lbf)
2. Install the No. 2 voltage inverter assembly with the 4 bolts.
  Torque: 7.0 N.m (71 kgf/cm, 62 in.lbf)
INSTALL NO. 2 CONSOLE BOX MOUNTING BRACKET
1. Install the No. 2 console box mounting bracket with the 4 bolts.
  Torque: 15 N.m (153 kgf/cm, 11 ft.lbf)
2. Connect the 4 connectors and 2 clamps.
INSTALL TRANSMISSION FLOOR SHIFT ASSEMBLY
Refer to INSTALLATION [07/2020 - ]
CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
Refer to PROCEDURE - Step 2
INSTALL BATTERY HOLE COVER
Refer to PROCEDURE - Step 57
INSTALL REAR NO. 2 FLOOR BOARD
Refer to PROCEDURE - Step 59